2-WIRE. 90V to 277V AC, POWER PAK SPP Starter, 1/2 HP to 10 HP. SPP-001.
This device is an SPP-001 POWER PAK SPP Starter, more commonly known as a Hard Start Kit or “Super Boost.” It is a specialized electrical component used to assist single-phase compressors in air conditioning and refrigeration systems during the critical startup phase.
Technical Specifications
- Part Number: SPP-001.
- Operating Voltage: Typically rated for a wide range, 90V to 277V AC, making it compatible with both 110/127V and 220/240V systems.
- Recommended Range: Suitable for compressors ranging from 1/2 HP to 10 HP.
- Torque Increase: Provides a massive 300% to 500% increase in starting torque, depending on the specific internal capacitor rating.
Core Function & Benefits
The “POW-R-PACK” is a 2-wire device that combines a Solid State Relay (PTC) and a Start Capacitor into one unit:
- The “Kick-Start”: It provides a temporary surge of electrical energy to the compressor’s start winding, helping it overcome high “head pressure” or internal friction.
- Low Voltage Support: It is essential for units operating in areas with unstable power or long wiring runs where a “voltage drop” might otherwise prevent the compressor from turning on.
- Protects the Compressor: By reducing the time the compressor spends in the high-amperage “start-up” phase (often by 50%), it significantly reduces heat buildup in the motor windings, extending the overall lifespan of the appliance.
- Flicker Reduction: It can help eliminate the “light flickering” often seen in homes when a large AC unit kicks on.
Installation Details
- Easy 2-Wire Setup: Unlike older 3-wire kits, this model features a simple parallel connection. It typically clips directly onto the terminals of the existing Run Capacitor.
- Configuration: It is a “non-polarized” device, meaning the two black wires can be connected to either side of the run capacitor terminals (one to the ‘H’ or ‘Herm’ terminal and one to the ‘C’ or ‘Common’ terminal).
Common Use Cases
- Stuck Compressors: Used as a last-resort repair to “break free” an older compressor that is humming but not starting.
- High-Efficiency ACs: Frequently added to modern high-efficiency units that use “TXV” (Thermal Expansion Valves), which can create high pressure that a standard motor struggles to start against.
Description
Description
This device is an SPP-001 POWER PAK SPP Starter, more commonly known as a Hard Start Kit or “Super Boost.” It is a specialized electrical component used to assist single-phase compressors in air conditioning and refrigeration systems during the critical startup phase.
Technical Specifications
- Part Number: SPP-001.
- Operating Voltage: Typically rated for a wide range, 90V to 277V AC, making it compatible with both 110/127V and 220/240V systems.
- Recommended Range: Suitable for compressors ranging from 1/2 HP to 10 HP.
- Torque Increase: Provides a massive 300% to 500% increase in starting torque, depending on the specific internal capacitor rating.
Core Function & Benefits
The “POW-R-PACK” is a 2-wire device that combines a Solid State Relay (PTC) and a Start Capacitor into one unit:
- The “Kick-Start”: It provides a temporary surge of electrical energy to the compressor’s start winding, helping it overcome high “head pressure” or internal friction.
- Low Voltage Support: It is essential for units operating in areas with unstable power or long wiring runs where a “voltage drop” might otherwise prevent the compressor from turning on.
- Protects the Compressor: By reducing the time the compressor spends in the high-amperage “start-up” phase (often by 50%), it significantly reduces heat buildup in the motor windings, extending the overall lifespan of the appliance.
- Flicker Reduction: It can help eliminate the “light flickering” often seen in homes when a large AC unit kicks on.
Installation Details
- Easy 2-Wire Setup: Unlike older 3-wire kits, this model features a simple parallel connection. It typically clips directly onto the terminals of the existing Run Capacitor.
- Configuration: It is a “non-polarized” device, meaning the two black wires can be connected to either side of the run capacitor terminals (one to the ‘H’ or ‘Herm’ terminal and one to the ‘C’ or ‘Common’ terminal).
Common Use Cases
- Stuck Compressors: Used as a last-resort repair to “break free” an older compressor that is humming but not starting.
- High-Efficiency ACs: Frequently added to modern high-efficiency units that use “TXV” (Thermal Expansion Valves), which can create high pressure that a standard motor struggles to start against.
Reviews
There are no reviews yet.