1/2″ EK-084 liquid line filter drier : SEK-007
This is a 1/2″ EK-084 F liquid line filter drier. While it looks similar to the previous one, it is a larger version designed for higher capacity systems.
Quick Comparison: EK-084 F vs. EK-083 F
The main difference is the connection size and the internal filtration capacity:
- Connection Size: 1/2 inch (up from 3/8″).
- Internal Volume: 8 cubic inches (same volume, but sized for 1/2″ piping).
Key Details
- Model Number: EK-084 F (SEK-007)
- Connection Type: 1/2″ SAE Flare (threaded fittings).
- Flow Direction: Unidirectional (follow the arrow on the label).
- Maximum Pressure: 680 PSIG (4700 KPA).
- Purpose: Removes moisture, acid, and solid debris from the liquid line of an HVAC/R system to prevent compressor failure.
Description
Description
This is a 1/2″ EK-084 F liquid line filter drier. While it looks similar to the previous one, it is a larger version designed for higher capacity systems.
Quick Comparison: EK-084 F vs. EK-083 F
The main difference is the connection size and the internal filtration capacity:
- Connection Size: 1/2 inch (up from 3/8″).
- Internal Volume: 8 cubic inches (same volume, but sized for 1/2″ piping).
Key Details
- Model Number: EK-084 F (SEK-007)
- Connection Type: 1/2″ SAE Flare (threaded fittings).
- Flow Direction: Unidirectional (follow the arrow on the label).
- Maximum Pressure: 680 PSIG (4700 KPA).
- Purpose: Removes moisture, acid, and solid debris from the liquid line of an HVAC/R system to prevent compressor failure.
Reviews
There are no reviews yet.